How To Clean Drum Unit On Brother Printer Mfc 8710dw

Make clean the drum unit

If your printout has dots at 94mm (3.7in.) intervals, the drum may take foreign cloth, such as mucilage from a label stuck on the drum surface. Please follow the steps below to solve the problem.

Annotation: Illustrations shown below are from a representative product and may differ from your Brother machine.

*If your Brother auto has a touchscreen, please follow the steps under "For touchscreen models" below.

DO NOT put a toner cartridge or a toner cartridge and drum unit associates into a fire. It could explode, resulting in injuries.
Practice Non utilize flammable substances, any type of spray, or an organic solvent/liquid containing booze or ammonia to make clean the inside or outside of the product. Doing so could crusade a fire or electrical shock. Instead, use but a dry, lint-gratis cloth.

Make sure that the machine is in the Ready mode.
Press Menu.
Printing the Up or Downward pointer key to choose Print Reports, and and so press OK.
Press the Up or Down arrow primal to choose Pulsate Dot Print, and then press OK.
Press Start to impress the drum dot bank check sheet.
Go to Footstep 6 under "For touchscreen models" below.

Brand sure that the machine is in the Ready mode.
Printing Bill of fare.
Press the Up or Downwardly arrow fundamental to display Print Reports.
Press Print Reports.
Press the Up or Down arrow key to display Drum Dot Print.
Printing Drum Dot Print.
The machine will display Press Start.
Press First to print the drum dot bank check canvass.
Leave the machine turned on for ten minutes for the internal fan to absurd the extremely hot parts inside the machine.
After the automobile has cooled down, turn off the automobile's power switch.
Press the front embrace release button and then open the front cover.
- After you lot accept just used the auto, some internal parts of the machine will be extremely hot. Await for the automobile to absurd down earlier you impact the internal parts of the machine.
- We recommend that yous put the drum unit of measurement and toner cartridge assembly on a piece of dispensable paper or cloth in case you accidentally spill or besprinkle toner.
- Handle the drum unit of measurement and toner cartridge assembly advisedly. If toner scatters on your easily or wearing apparel, wipe or wash it off with common cold water.
- To prevent impairment to the car from static electricity, Practise NOT touch the electrodes shown in the illustration.

Related Models

DCP-8110DN, DCP-8112DN, DCP-8150DN, DCP-8152DN, DCP-8155DN, DCP-8157DN, MFC-8510DN, MFC-8512DN, MFC-8710DW, MFC-8712DW, MFC-8810DW, MFC-8910DW, MFC-8912DW, MFC-8950DW, MFC-8950DWT, MFC-8952DW, MFC-8952DWT